pandora pb-3

overview

The PB-3 is our solution to a large window, enclosed emitter, durable red dot optic utilizing the ACRO® P2 footprint. Like the Promethean LP-1, the Pandora’s Box is machined from 7075-T6 aluminum and is hard-coat anodized to Type III MIL-A-8625.

The PB-3 was designed with a standoff around the objective lens for one-handed pistol slide manipulation. Similarly, the ocular lens has an offset to protect glass during pistol/rifle retraction through barriers. A beveled leading edge of the battery compartment assists with re-holstering, and sealing plates affix the lenses into the housing for added glass security under impact and recoil vectors. The PB-3 has a 30% larger window than industry competitors (21x17mm), and is IPX8 rated for 90 minutes of submersion at a depth of 10m. 

aurawake

AuraWake™ is CORD's patented, reliable utilization of shake-to-wake technology. Competitor shake-to-wake optics will auto shut-off after a set number of hours to conserve runtime, and a motion sensor reactivates the reticle once movement is detected. However, motion sensors may exhibit unreliability if damaged during impact, fostering a subsequent equipment failure upon weapon deployment. 

To prevent catastrophic aiming system failure, CORD Instruments is proud to implement AuraWake™, a new partial shake-to-wake system that ties the motion sensor only to the circuit of the 32-MOA ring.

Following 5 minutes of non use, the PB-3’s outer CQB ring will “sleep,” yet maintain the 3-MOA dot on at all times. This provides a constant, action-ready aiming reference that cannot be interfered with upon motion sensor failure, while significantly increasing runtime.

  • 7075-T6 housing.

  • Sealing plates to sandwich lenses into housing for added security.

  • Serrations on housing for added grip.

  • Standoff around objective lens for one handed pistol slide manipulation.

  • Ocular offset to protect glass during pistol/rifle retraction through barriers.

  • Beveled leading edge of battery compartment to assist re-holstering.

  • ID grid on housing for various identifiers

  • IPX8 rated to 10m submersion (90 minutes).

  • Recessed brightness controls.

  • 3V CR2032 - capable of 30,000+ hr runtime on various daytime settings.

  • 7 daylight settings, 3 NV settings.

  • 3/32 MOA dot/ring reticle.

  • Three built-in reticles paired with our Patent Pending Aurawake Technology.

  • ACRO® P2 footprint.

specs

available at: